PCM610 Differential Pressure Transmitter
The Apure PCM610 is a differential pressure transmitter. It measures the pressure difference between two process connections and sends a signal to a compatible display or control system.
- High- and low-side pressure measurement
- Differential span and static pressure specified separately
- Output matched to the receiving system
How differential pressure is measured
The transmitter measures the pressure at the high side minus the pressure at the low side. Across a filter, this difference represents pressure drop. The pressure at each port can be much higher than the differential span, so check the static and overload limits as well as the range.
Selection and commissioning
Provide the expected pressure difference, line pressure, pressure spikes, medium and process temperature. Confirm the port connections, wetted materials, supply voltage and output. Follow the supplied installation instructions for the impulse lines and verify the zero and signal scaling at commissioning.
Configuration checklist
Use the PCM610 order-specific datasheet to confirm the values below for the supplied configuration.
| Brand | Apure |
|---|---|
| Model | PCM610 |
| Measurement | Differential pressure between the high and low process connections |
| Differential range and accuracy | Confirm the calibrated span and conditions for the accuracy rating. |
| Static and overload limits | Confirm the maximum line pressure and allowable overload on each side. |
| Process connections and materials | Confirm the port threads, wetted materials and temperature limits. |
| Supply and output | Confirm the signal, supply voltage and wiring diagram for the ordered unit. |