UHZ Liquid Float Magnetic Level Gauge

The Apure UHZ uses a magnetic float to display liquid level locally. The mechanical indicator needs no electrical supply. Level switches and remote transmission depend on the ordered configuration.

  • Local magnetic indication
  • Side or top mounting by version
  • Optional switches and remote transmitter

How the magnetic gauge works

The float rises and falls with the liquid. Its magnet moves the external indicator without an electrical connection to the float. In a side-mounted bypass design, keep the vessel connections open during normal measurement so the liquid in the chamber follows the vessel level.

Float, materials and mounting

Provide the liquid density at operating temperature, the level span, connection standard, mounting position and the process pressure and temperature. Match the float, chamber and seals to those conditions. For corrosive liquids, check compatibility with the actual concentration and temperature. Select the switch points or remote output separately if required.

The published range and temperature references below differ. Confirm the ordered assembly against the required measuring span, temperature, pressure and material. The earlier overview also listed PTFE-lined stainless steel. Confirm its availability and chemical compatibility for the selected configuration.

BrandApure
ModelUHZ
Measure range200~20000mm
Nominal pressure≤1.6Mpa
flange standardDIN, ANSI, JIS
Medium density≥0.42g/cm³
Working temperature-20~450˚C

Additional published references

Measuring range200-20000mm
Medium temperature≤ 100℃ (High temperature can be customized )
Medium pressure≤ 1.6mpa
Measuring range200-20000mm/cm
Accuracy±5mm
Medium density≥ 0.42g/cm³
Standard flangeDN20/DN25
InstallationSide or top mounted
Protection levelIP65
Measuring materials304,316 stainless steel,PP
Optional outputremote transmission, liquid level witch, hart protocol

Other legacy references to confirm

Measuring range: 20~200m | Working temperature: ≤10°C | Nominal pressure: ≤1.6Mpa | Meter material: P or S304, S316 stainlestel. | Flange standard: DIN, ANSI, JS | Installation type: side and top mounted. | Medium density: ≥0.42g/cm³