PCM300T Absolute Pressure Transmitter

The Apure PCM300T is a pressure transmitter. Choose the absolute-pressure version when the measurement must be referenced to vacuum, and match its electrical output to the receiving instrument.

  • Absolute pressure measured relative to vacuum
  • Pressure range selected for the application
  • Electrical output and connector by configuration

Absolute and gauge pressure

Absolute pressure is referenced to vacuum. Gauge pressure is referenced to ambient air. An absolute-pressure transmitter therefore reads atmospheric pressure when open to the atmosphere. Specify the pressure reference and calibrated span when ordering.

Selection and installation

Provide the medium, normal and maximum pressure, process and ambient temperature, process connection, supply voltage and output required by the receiving system. Confirm the wetted materials and use the wiring diagram for the supplied connector or cable. Match the PLC or display scaling to the calibrated endpoints.

Series illustrations

Confirm the dimensions and installation details using the drawing for the ordered unit.

Previously listed specifications

These are previously published series entries. The range combines pressure references and does not describe one absolute-pressure span. Verify the calibrated absolute range, the meaning of the overload entry, and the permitted supply and output combination for the ordered unit. Where a hazardous-area approval is required, verify the certificate and marking for the exact configuration.

BrandApure
ModelPCM300T
Range-100~20Kpa~100Mpa
Output Signal4-20mA 0-5V 0-10V
Power Supply12~24VDC (typical), 9~12VDC
Accuracy Class0.5%FS (typical), 0.3%FS, 0.2%FS, 0.1%FS
Compensation Temperature-10~70℃
Working Temperature-20~80℃
Zero Temperature Drift0.5%FS (max)
Sensitivity Temperature Drift0.5%FS (max)
Pressure Overload2 times below 10 Mpa; 1.5 times mechanical shock over 25
Explosion-proof DegreeExiaⅡCT6
Series pressure referencesgauge pressure, absolute pressure, seal pressure