COR Digital Corrosion Rate Sensor
Apure COR Digital Corrosion Rate Sensor is an intelligent on-line chemical analysis instrument. It can continuously monitor data and realize remote transmission monitoring and recording. It can also connect to the RS485 interface. You can also easily connect to a computer using the 4-20ma protocol.
- Easy to operate
- Widely used
- Automation
Apure COR Digital Corrosion Rate Sensor is an intelligent on-line chemical analysis instrument. It can continuously monitor data and realize remote transmission monitoring and recording. It can also connect to the RS485 interface. You can also easily connect to a computer using the 4-20ma protocol.
CHARACTERISTICS:
- Design of board card modularity, for convenience of assembly and configuration.
- 4.3 inch High-definition screen.
- Isolating transmitting output, with little interference.
- Isolating RS485 communication.
- Can be PH / ORP measurement, temperature measurement, upper and lower limit control, transmission output, RS485 communication.
- Configurable manual and auto temperature offset function.
- Configurable upper/lower limit warning and delay.
- Addition of universal password.
- Industrial controlled door keep, to avoid instrument halted.
| Brand | Apure |
| Model | COR-A |
| Measuring Range | 0~5mm/a |
| Accuracy | ±3%FS |
| Temperature | 0~80℃ |
| Humidity | ≤85% |
| Resolution | 0.0001mm/a |
| Pressure | 0-3bar |
| Output | 4-20mA&RS485 |
