Industrial Ozonia Ozone Generator System
The industrial ozone generator system combines an ozone generator with feed-gas preparation, cooling and controls for site-specific treatment projects. Confirm the equipment included in the quotation.
- Ozone generation and feed-gas preparation
- Cooling and control by configuration
- System scope matched to the treatment process
Feed-gas preparation and generation
A typical configuration uses compressed air, filtration and drying upstream of a pressure swing adsorption (PSA) oxygen generator. The prepared oxygen feeds the ozone generator. Confirm the required feed purity, dew point, pressure and flow at the rated output.
Water treatment system scope
Provide the treatment objective, water flow and water quality, and confirm which party supplies the injector or contactor, off-gas destructor, ventilation, monitoring and interlocks. Check the electrical supply and cooling utilities for the complete installation.
Configuration and commissioning
Confirm the generator, feed-gas train, cooling and controls against the equipment list and site conditions. Check how the system responds to feed-gas, cooling or ozone alarms and verify the operating range during commissioning.
System configuration diagrams
The previous listing gives 1000g/H as an output reference and separately lists smaller values in g/H without identifying the models. Confirm the manufacturer and model against the quotation and nameplate. Request the rated output, gas concentration, electrical supply and cooling requirements for the complete package.
| Brand | Apure |
|---|---|
| Material | Stainless steel |
| Listed ozone output | 1000g/H |
| Other listed output values (models to confirm) | 2, 5, 10, 15, 20, 30 g/H |
| Power Supply | 220V±10% |
| Listed cooling options | Air cooling/water cooling |
| Electrode material mentioned in the previous overview | 316L stainless steel |
| Output adjustment mentioned in the previous overview | 10%–100%. Confirm the range at the specified gas and cooling conditions. |
| Duty mentioned in the previous overview | 24hrs. Confirm continuous-duty conditions for the ordered system. |
| Earlier cooling performance reference | 20% increase was previously stated. Confirm the comparison baseline and test conditions. |