RP-3000 Automatic pH ORP Controller
Apure RP-3000 PH ORP controller is one of the intelligent online chemical analysis equipment, is a widely used in thermal power, chemical fertilizer, metallurgy, environmental protection, Pharmaceutical, biochemical, food and tap water solution PH value or ORP value and temperature of the continuous monitor.
- Data remote transmission
- On-line monitoring
- Automation
Apure RP-3000 PH ORP controller is one of the intelligent online chemical analysis equipment, is a widely used in thermal power, chemical fertilizer, metallurgy, environmental protection, Pharmaceutical, biochemical, food and tap water solution PH value or ORP value and temperature of the continuous monitor.、
| Dimension | Power | 220v | 5w |
| Dimension | 144*144 | cm | |
| connect | 1/2″ | NPT | |
| Main performance parameters | Measure range | 0-14 ph | -1999-+1999mv |
| Signal/td> | 4-20 | mA | |
| Other | 2 relays | — | |
| Other | Hydraulic system | KPa | 50.1 |
| Main pump | KN | 161 | |
| Rate flow | KN | 125 |
CHARACTERISTICS
- Design of board card modularity, for convenience of assembly and configuration.
- 4.3 inch High-definition screen.
- Isolating transmitting output, with little interference.
- Isolating RS485 communication.
- Can be PH / ORP measurement, temperature measurement, upper and lower limit control, transmission output, RS485 communication.
- Configurable manual and auto temperature offset function.
- Configurable upper/lower limit warning and delay.
- Addition of universal password.
- Industrial controlled door keep, to avoid instrument halted.
| Brand | Apure |
|---|---|
| Model | RP-3000 |
| Measuring range | PH: 0~14.00pH ORP: -1999 ~ 1999 mV |
| Resolution | PH: 0.01PH ORP:1mV |
| Accuracy | PH: 1%FS ORP:1%FS |
| Temp | 0~135℃ |
| Signal isolation output | Two 4-20mA outputs for pH and ORP |
| Control interface | Two limited ON/OFF contact output(Relay) |
| Dimensions | 144×144×120mm |
| Cut off dimensions | 138×138mm |
