AYT Digital Liquid Magnetic Flow Meter
The Apure AYT is an inline electromagnetic flow meter for volumetric measurement of conductive liquids. Select the meter size, liner and electrodes for the liquid, operating pressure and temperature, and expected flow range.
- Multi-functional Intelligent Converter
- Rapid response and high stability
- High-definition LCD Backlight Display
Electrodes sense the voltage induced as a conductive liquid moves through the magnetic field. The transmitter uses the measured velocity and the meter bore to report volumetric flow. Typical applications include conductive process water, wastewater and compatible chemical solutions. Confirm the minimum conductivity for the ordered meter, including at the expected operating temperature. Confirm material compatibility before selecting a liner or electrode for corrosive or abrasive service.
Installation and selection
Select a location where the measuring tube stays full. Confirm the straight runs, grounding or potential equalization, and flow direction specified for the installed arrangement. Check the required flow units, totalizer direction and output configuration during commissioning. RS-485 and RS-232 describe interfaces. Confirm the communication protocol, available outputs and wiring for the converter supplied with the meter.
Use the listed size and liner data to identify a candidate configuration. Confirm the supplied liner temperature limit, pressure class, accuracy basis and any required hazardous-area marking on the model documentation and nameplate.
Listed liner and size combinations
Piped PTFE Lining: 10 15 20 25 32 40 50 65 80 100 125 150 200 250 300 350 400 450 500 600
Piped rubber lining: 40 50 65 80 100 125 150 200 250 300 350 400 500 600 800 1000 1200
Product video
| Brand | Apure |
|---|---|
| Model | AYT |
| Flow direction | positive and negative net flow |
| Measure extention ratio | 150:1 |
| Repeating erro | ±0.1% of the meterage |
| Accuracy grade | pipeline style: 0.5 1.0 |
| The temperature of themeasured medium | ordinary rubber underlay:-20~+60 High temperature rubber underlay:-20~+90 Polythene underlay: -30~+100 High temperature underlay:-30~+180 |
| Rating work pressure | Pipeline style : DN10-65:≤2.5MPA DN80-DN150:≤1.6MPA DN200- DN 1200:≤1.0MPA |
| Explosion-proof | md11BT4 |
| Power supply | 85~265V, 45~63HZ |
| Environmental temperature | -25~60℃ |
