PHK Industrial Digital Water pH Sensor

The Apure PHK is a digital pH sensor for online measurement in a compatible process installation. The listed digital configuration communicates through RS485 using Modbus RTU. Select the sensor, process connection and receiving controller as a complete system.

  • High Stability
  • Widely used
  • Fast response

Use the PHK to monitor pH in an aqueous process that is compatible with the sensor’s wetted materials and operating limits. Confirm the supplied version’s electrical interface and register map before connecting it to a PLC or controller. A digital RS485 probe is not interchangeable with a raw glass-electrode input.

Integration, calibration and maintenance

  • RS485 / Modbus RTU: match power, polarity, address, baud rate and register definitions to the supplied sensor documentation.
  • Confirm the process connection, wetted materials, pressure and temperature limits for the actual installation. A compatible thread alone does not establish process suitability.
  • Calibrate using the correct buffer family and temperature values supported by the sensor/controller combination. Record the settings and verification result.
  • Provide access for inspection and approved cleaning. Follow the probe’s storage, conditioning and replacement instructions rather than assuming a universal service life.

Digital sensor integration

Before connection, obtain the wiring and Modbus RTU register map for the supplied PHK version. Match supply voltage, polarity, serial address, baud rate and parity; check register addresses, data types, scaling and units in the receiving device. A controller’s host-communication port is not automatically a digital-sensor input.

Process selection and commissioning

Choose the pH sensing/reference system, wetted materials and mounting for the actual water sample and cleaning procedure. Confirm compatibility for unusual chemical compositions rather than selecting by pH range alone. Preserve access for inspection and cleaning, and verify a stable reading after calibration before relying on it for process control.

The following specifications describe the PHK RS485 configuration listed on this page. Confirm the current supplied version, process limits, cable and mounting in its datasheet and quotation before ordering.

Product NameDigital ph sensor
BrandAPURE
ModelPHK
Measurement range0~14pH
Temp0-65°C
Pressure (MPa)0-0.2
Output signalRS485(MODBUS/RTU)
Accuracy±0.1pH
Power Supply12VDC~24VDC ±10%
Resolution0.01pH
Cable length5m, other length can be customized